top of page
PRANDTL V2

This is our version 2 of the famous PRANDTL wing project developed by NASA,  Armstrong Chief Scientist Al Bowers challenged the fundamental core assumptions of leaders in the field of aviation. He began his multiple-year trek to prove that not only could adverse yaw be overcome, but it could be turned into proverse yaw for aircraft, without relying on rudders or complicated computerized flight controls to accomplish it - just as birds achieve it (read more). You can chose between 3 differents canopies depending on the type of flight that you wanna make: Pure glider, motor glide or motor glider with FPV camera. We provide you the option of towing the plane by installing a simple an effective release system.

Includes:
-STL files

-G-codes for PLA and LW-PLA
For free:

-Model for Real Flight simulator
(see video)

€17

Features:
-Motor glider

-FPV camera ready
-Wire skids for landing in asphalt

-Launch handle

logo.JPG

SPECIFICATIONS

                                   LW-PLA    PLA
STRUCTURE WEIGHT      250g       480g

TAKE OFF WEIGHT*        470g       780g
STALL SPEED                 24km/h   30km/h
MAX GLIDE RATIO           15          18

MIN SINK RATE              0,55 m/s  0,58m/s
WING LOADING             25g/dm²   41g/dm² 

WING SPAN               1620mm (64")

WING SURFACE          19dm2

WING ASPECT RATIO   14
WING AIRFOIL            NACA 2416

* Weight for motorized version

ARRANGEMENT DRAWING AND PRINTING PARAMETERS​

Printing_parameters_.jpg

SHOPPING LIST

ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE

3D PRINTER

MIN PRINTING VOLUME - 180x180X195 (X,Y,Z)
NOZZLE DIAMETER - 0,4 mm

​

Recommended

FILAMENT
QUANTITY - 250g (LW-PLA) or 480g (PLA or PETG)

Recommended

colorfabb.JPG

ECLIPSON STANDARD POWER PACK

SERVOS NEEDED - x2

​

Recommended

Captura.PNG

BATTERY

VOLTAGE - 11,1V (3S) or 7,4V (2S)

CAPACITY - 500 mAh to 2000 mAh

DISCHARGE - >20C 

​

Recommended

BAT2


Note: The PLA version requires extra weight in the nose to reach the C.G. Use fishing lead or any other heavy material.

​

bat.jpg

RADIO CONTROL SYSTEM

MIN CHANNELS - 5CH

​

Recommended

Captura.JPG

FPV SYSTEM

​

Recommended

TX02.JPG

OTHER PARTS
-PUSH RODS - D1,2mm (min length 50mm)  5units
-BOLT - M3X15mm (with nuts and washers)  4units
-SCREW - M2X8mm (aprox)  20units
-VELCRO
-CARBON FIBER TUBE - D6x4mm (length 420mm) 1units

(Not necessary for PLA version)
-CARBON FIBER TUBE - D4x3mm (length 330mm) 2units
(Not necessary for PLA version)

-GLUE - cyanoacrylate + accelerator
-PUSH RODS CONNECTORS  2units
-WIRE - 0,5 mm
-SERVO LEAD EXTENSION
 (min 400mm) 2 units
-TAPE

-FISHING LINE (Optional to tow the plane)

Recommended

leads.JPG
Eclipson 3d printed aircraft
bottom of page