MODEL B XL
The big brother of our classic looking bush plane design is finally here! A 1.5 metre wingspan, sturdy landing gear (with huge all terrain tundra tyres), independent flaps and interchangeable floats are some of the main features of this plane. The bigger size makes the aircraft much easier to fly compared with the original Model B. This, together with the simple and sturdy landing gear concept, makes this aircraft one of our best trainers. Keep in mind that this is not just a scaled design of our well known Model B. The Model B XL has been designed from scratch implementing the latest design concepts including compatibility with the "spiralize outer contour/vase mode" option; the newest printing category B2. Furthermore, the aerodynamics have been revised to improve the aircraft’s safety and performance.
Includes:
-STL files
-2 Scheme design
-G-codes
€38
Features:
-Bush plane
-Optional floats
-Durable landing gear
-Flaps
-Trainer
 |  |  |  |  |
|---|---|---|---|---|
 |  |  |  |  |
 |  |
SPECIFICATIONS
PRINTED WEIGHT 700g
TAKE OFF WEIGHT 1300g
STALL SPEED 32km/h
WING LOADING 40g/dm²
WING SPAN 1500mm (60")
WING SURFACE 32dm²
WING ASPECT RATIO 7
LENGTH 1050mm
Note: It is required the use of LW-PLA for this model.
*Weight shown valid for land version. Float version weight 200g more
SHOPPING LIST
ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE
3D PRINTER
MIN PRINTING VOLUME - 200x200X200 (X,Y,Z)
NOZZLE DIAMETER - 0,4 mm
Recommended
FILAMENT
QUANTITY -
Land version- ≈560g (LW-PLA) , ≈80g (PLA) 20g (TPU)
Float version- ≈760g (LW-PLA) and ≈160g (PLA) 20g (TPU)
Recommended
CONFIGURATION 1
POWERFUL POWER PACK
(This configuration is mandatory for the float version)
MOTOR
KV- 1250
MAX POWER - 300 to 1000 watts
DIAMETER - 35mm
VOLTAGE - Up to 14,8V (4S)
Proposed
SunnySky X2814 1250KV
PROPELLER
8x6
Note: Do not use bigger prop for the float version
Proposed:
Gemfan 8X6
BATTERY
VOLTAGE - 14,8V (4S)
CAPACITY - 2000 mAh
DISCHARGE - >20C
Recommended
BAT3
CONFIGURATION 2
ECLIPSON STANDARD POWER PACK
SERVOS NEEDED - x6
Note: In order to cool down the motor it is not recommended to use the spinner for this configuration.
Recommended
BATTERY
VOLTAGE - 14,8V (4S)
CAPACITY - 2000 mAh
DISCHARGE - >20C
Recommended
BAT3
RADIO CONTROL SYSTEM
MIN CHANNELS - 7CH
Recommended
OTHER PARTS
-PUSH RODS - D1,2mm (min length 650mm) 2units
-PUSH RODS - D1,2mm (min length 60mm) 4units
-STEEL ROD - D3mm (Length 390mm) 1units
-STEEL ROD - D3mm (Length 330mm) 1units
-CF TUBE - D8mm (Length 500mm) 1unit
-CF TUBE - D6mm (Length 500mm) 2units
-STOP COLLARS D3,1mm 4units
-BOLT - M3X15mm (with nuts and washers) 4units
-BOLT - M3X30mm (with nuts and washers) 2units
-SCREW - M2X8mm (approx) 40units
-GLUE - cyanoacrylate
-PUSH RODS CONNECTORS 7units
-RUBBER BAND- L50mm (approx.) 2 units
-FISHING LINE (for the float version only)
-SEALANT SPRAY (for the float version only)
-VELCRO
Recommended
