top of page
MODEL B V2

The Eclipson Model B V2 captures the essence of a classic Alaskan bush plane with its rugged design and timeless appeal. This second version incorporates the latest design improvements, enhancing both performance and durability. Equipped with oversized Tundra wheels and a durable landing gear system reinforced by steel rods, the plane is capable of taking off and landing on almost any surface. The addition of wing struts not only enhances its scale appearance but also increases structural strength, making it perfect for aggressive, aerobatic maneuvers. Its large control surfaces offer remarkable agility, while the low stall speed ensures stable, forgiving flight characteristics. The Eclipson Model B V2 is an excellent choice for pilots of all skill levels, from beginners to seasoned experts

Includes:
-STL files

-2 Scheme design
-G-codes for LW-PLA

€29

Features:
-Bush plane

-Durable landing gear

-Full flaperon design

-Trainer 

Model B

SPECIFICATIONS

                                    LW-PLA   
PRINTED WEIGHT             250g    

TAKE OFF WEIGHT            700g            
STALL SPEED                  25km/h  
MIN WING LOADING      36g/dm²  

WING SPAN               1150mm (45")
WING SURFACE          19dm²
WING ASPECT RATIO   7
LENGTH                     776mm

Note: While LW-PLA is not mandatory, it is highly recommended. The full PLA version will have a higher stall speed and may require nose weight to achieve the correct CG

ARRANGEMENT DRAWING AND PRINTING PARAMETERS​

Model_B.jpg

This is the V1 assembly guide, which is still applicable. The only conceptual design change is the replacement of the canopy lock magnet system with the updated rubber band locking system, as shown in detail F of the drawing.

SHOPPING LIST

ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE

3D PRINTER

MIN PRINTING VOLUME - 150x150X190 (X,Y,Z)
NOZZLE DIAMETER - 0,4 mm

​

Recommended

FILAMENT
QUANTITY -  ≈250g (LW-PLA/TPU) or ≈50g (PLA)

Recommended

colorfabb.JPG

ECLIPSON STANDARD POWER PACK
SERVOS NEEDED - x4
​
Recommended

Captura.PNG

BATTERY
VOLTAGE - 7,4V (2S) or 11,1V (3S)
CAPACITY - 1000 mAh to 1500 mAh
DISCHARGE - >20C 

Recommended
BAT1

bat.jpg

RADIO CONTROL SYSTEM
MIN CHANNELS - 5CH

Recommended

Captura.JPG

OTHER PARTS
-PUSH RODS - D1,2mm (min length 450mm)  2units
-STEEL ROD - D2
mm (Length 350mm) 2units
-
STOP COLLARS D2,1mm  4units
-BOLT - M3X15mm (with nuts and washers)  4units
-
BOLT - M3X30mm (with nuts and washers)  2units
-SCREW - M2X8mm (aprox) 34units
-VELCRO
-GLUE - cyanoacrylate
-PUSH RODS CONNECTORS  4units (optional)
-RUBBER BAND- L50mm (approx.) 2 units


Recommended

Eclipson 3d printed aircraft
bottom of page