top of page
HELIX

The Helix is a cutting-edge aircraft that sets itself apart from traditional designs. Thanks to the "minimum retraction design philosophy" together with a reduced size this model is extremely easy to print, assemble and transport. The hidden linkages ensure aerodynamic efficiency while also contributing to its sleek design. This model is also equipped with landing rails made out of push rods that will allow you to land on asphalt or any kind of rough terrain without any issue.  Furthermore it is equipped with LEDs, making for eye-catching footage in your videos. Whether it’s taking to the skies or simply on display, the Helix combines truly unparalleled form and function.

Includes:
-STL files

-G-codes

€27

Features:
-For analog and digital FPV 

-Fast and agile
-Easy to build
​

SPECIFICATIONS

PRINTED WEIGHT            175g
TAKE OFF WEIGHT           460g
STALL SPEED                  35km/h
WING LOADING              35g/dm²

WING SPAN                 820mm
WING SURFACE            13dm²
WING ASPECT RATIO    5
LENGTH                      440mm

Note: It is required the use of LW-PLA for this model.

ARRANGEMENT DRAWING AND PRINTING PARAMETERS​

Printing_parameters.jpg
linkages

SHOPPING LIST

ALL THE COMPONENTS THAT YOU HAVE TO BUY TO FLY THE AIRPLANE

3D PRINTER
MIN PRINTING VOLUME - 200x200X200 (X,Y,Z)
NOZZLE DIAMETER - 0,4 mm


Recommended

FILAMENT
QUANTITY - 150g (LW-PLA) 25g (PLA)

Recommended

colorfabb.JPG

CONFIGURATION 1

LIGHT POWER PACK

MOTOR
KV-  1500 to 2500
DIAMETER - 28mm
VOLTAGE - 11,1V (3S)

Proposed
iFlight XING-E Pro 1800KV

ESC
CURRENT - 30A
VOLTAGE - 11,1V (3S)

Proposed
Skywalker30A + XT60

PROPELLER
FOR 1800KV - 5x5
FOR 2500KV - 4X4

Proposed:
Gemfan 5x5

MOTOR.jpg
ESC.jpg
prop.JPG

CONFIGURATION 2

ECLIPSON STANDARD POWER PACK
SERVOS NEEDED - x2

Recommended

*Use proppeller 5X5
 

Captura.PNG

BATTERY
VOLTAGE - 11,1V (3S)
CAPACITY - 1800 mAh to 2500 mAh
DISCHARGE - >20C 

Recommended
BAT5

bat.jpg

RADIO CONTROL SYSTEM
MIN CHANNELS - 3CH

Recommended

Captura.JPG

OTHER PARTS
-PUSH RODS - D1,2mm (min length 300mm)  1units
-CF ROD - D3 (Length 210mm) 2units
-CF TUBE - D8mm (Length 635mm) 1unit

-BOLT (SHCS) - M3X8mm (with nuts and washers)  4units
-SCREW - M2X8mm (aprox) 4units
-GLUE - cyanoacrylate

-VELCRO
-BALL PEN SPRING - 0.3x5x35 mm 1UNIT
-SERVO LINKAGES: (see drawing)


Recommended

Eclipson 3d printed aircraft
Subs
bottom of page